RXL Prices and Parts List

RXL Examples | Price & Parts List | Ski-Doo

1978 Polaris RXL Reproduction Parts Listing (Prices in US dollars) ALL PRICES SUBJECT TO CHANGE WITHOUT NOTICE.

  • BULKHEADbulkhead
    • New reproduction RXL bulkhead – exact as OEM $2,000.00
    • New competition RXL bulkhead – reinforced for racing, with thicker engine plate, for Fuji 340 $2,300.00
    • New 3 cylinder RXL bulkhead – will fit Centurion 3 cylinder. $2,500.00
    • Polishing of bulkhead, add $280.00
  • RXL INDIVIDUAL BULKHEAD REPAIR PARTS
    • Square front bulkhead brace $70.00
    • Shock towers, 3 pieces each side (kit) $65.00 each side
    • Forward tunnel close off panel $190.00
    • R/H side bulkhead frame $100.00
    • L/H side bulkhead frame panel $190.00
    • Aft curved clutch cover $200.00Bulkhead
    • Lower curved clutch cover $100.00
    • L/H lower square tube brace $50.00
    • L/H hinged clutch cover $30.00
    • L/H clutch cover brace $40.00
    • Crush tubes, for mounting radius rods to bulkhead, 5 required for original RXL, 4 required for competition, $3.00 each
    • R/H lower square tube support $25.00
  • STEERING & SUSPENSION
    • RXL steering gear-exact includes competition style steering post w/o clamp on type handle bar, includes radius rods, steering rods w/o rod ends, lower fore & aft steering shaft with attach brackets, $410.00 add $40.00 for original style welded on handlebar.
    • RXL original size spindle trailing arms, spindle not included, 4130 steel, no rod end $355.00/pair
    • Rear trailing arm attach bushings, original/pair, $20.00
    • Competition RXL trailing arms, pair, made for larger spindle, spindle not included, reinforced, 4130 steel, no rod end, set up for Fox shocks $400.00/pair
    • Competition torsion bar with aluminum arms,7/8’ dia $270.00
    • Competition torsion bar mounts, steel, $150.00/pr
    • Stock 5/8” torsion bar--- exact with weld on end, $225.00
    • RXL original style torsion bar extruded aluminum mounts with bushings, l/h & r/h required $90.00ea
    • RXL stock steering stop loop with mounting plates- $50.00
    • RXL handlebar and post - as original with welded handle bar and hook $200.00
    • RXL competition steering post with clamp on handle bar $200.00
    • RXL aluminum handle bar mount cross shaft, $25.00
    • RXL steel angle bracket for steering cross shaft at chaincase, $10.00
    • RXL skis –reproduction , with aluminum hoop, no carbide, pair $500.00
    • RXL reproduction 10” carbide, 5 studs to fit RXL ski, pair $195.00
    • RXL reproduction hydraulic shocks, very close but not exact in appearance. Fully functional with lower spherical bearing, $190.00 per shock only.
    • RXL complete hydraulic shock assembly, including upper spring retainer, coil spring and lower cam adjuster, assembled --- $290.00 per assembly
    • Reproduction 112” RXL suspension, limited quantity available, $ 2,600.00 (call for availability)
    • RXL front aluminum steering block – exact $155.00
    • Radius rods, original diameter aluminum tube w/o rod ends threaded L/H & R/H, set of 4, $85.00
    • Steering rods, original diameter aluminum tube w/o rod ends threaded L/H & R/H, set of 2 $45.00
  • TUNNEL & ATTACHING PARTS Tunell
    • New Fuji 340 molded coolant hoses $190.00
    • RXL aluminum square rear bumper – exact $35.00
    • RXL rear tunnel close off panel, ’78 or ’79-- exact $85.00
    • RXL original tach mount – exact $15.00
    • RXL original temperature gauge mount – exact $15.00
    • RXL original gas tank mounts/pair – exact $15.00
    • RXL radiator/hood mounts/pair – exact $60.00
    • NEW Reproduction TX/TXL/RXL tunnel, including proper nibs in running boards, cut to fit your application, not polished $400.00.
    • TX tunnel modified to fit RXL , specify short (original RXL) or long(TX), salvaged from TX/TXL, stripped of paint, not polished, rough finish, $390.00
    • Polishing of tunnel, add $290.00
    • Chaincase, original style, bead blasted, salvaged, $90.00
    • RXL R/H Foot Stirrup, originally dealer installed only, $80.00
    • Rear tunnel side support plates at bumper, $40.00/pair
    • Tunnel suspension mount plates $100.00/set of 4
  • RADIATOR & COOLING
    • New Fuji 340 molded coolant hoses $190.00
    • RXL original style coolant reservoir, steel w/o cap – exact $20.00
    • RXL competition aluminum coolant reservoir, w/o cap $190.00
    • RXL brass radiator, reproduction of original, not exact in appearance, $250.00
    • Windage cover, behind radiator, attached to hood/radiator mounts, $15.00
  • HOOD & ACCESSORIES
    • RXL hood, ’78 as original, requires finishing, no paint or decals, $350.00
    • RXL original style hood hold down straps with hook, $50.00/pr.
    • Hood lower side mount channels, $15.00/pr
  • ENGINE & PIPES
    • NOTE: RXL TUNED PIPES ARE NOT AVAILABLE UNTIL FURTHER NOTICE, our apologies.
    • RXL tuned pipes – 340 twin as original, fitted to chassis with stinger, for Fuji 340, not painted, without flanges - call for pricing
    • Exhaust pipe flanges, to fit Fuji 340 mono block and RXL pipes, $150.00/pair.
    • Exhaust pipe flanges, to fit Fuji 340 individual cyl super mod style and RXL pipes, $ 150.00/pr
  • MISCELLANEOUS ACCESSORIES
    • RXL seat, exact, (any color) – $410.00
    • Midnight Blue Express decals, as original issue. $ 3.00 each.
    • Polaris RXL decal, copied from ’78 Polaris promotion race brochure, rare issue, call for photo, $7.00 each.
  • COMING SOON!
    • RXL cotton cloth cover with RXL stencil for 1978 RXL (call for info)
  • ITEMS REQUIRED TO COMPLETE AN ENTIRE RXL
    • Engine and accessories
    • Clutches
    • Pipes
    • Shocks and springs
    • Track of your choice
    • Sprocket drive shaft
    • Chaincase, jackshaft, brake rotor, TX
    • Suspension of your choice
    • Handle bar, your choice
    • Throttle handle and cable
    • Brake master cylinder and lever
    • Gas tank, your choice
    • Skis, your choice
    • All rod ends and bearings [see page below for list]
    • All attaching bolts and hardware
  • ROLLING CHASSIS INCLUDES:Roller
    • I get numerous requests for a "rolling chassis". The following is a description of what this entails. Please call for clarification.
    • New RXL bulkhead, original style or competition, please specify which engine to be used. Not polished. Add $225.00 for polish.
    • Tunnel, fitted to bulkhead, specify original RXL length for 112” track or longer. Not polished, add $280.00 for polish.
    • Original style RXL steering gear, all mounted. Includes handlebar post, (specify original RXL welded bar or clamp on bar is desired), all steering linkage up to ski spindle but not including top steering arm or spindle, radius rods, and steering rods. Does not include rod ends ( must be purchased separately).
    • RXL style trailing arms (specify original or competition), no rod ends.
    • New ’78 style hood, not finished, no paint or decals, mounted with hold downs.
    • Radiator, original RXL style, for 340 twin, mounted.
    • Hood/ radiator mounts.
    • RXL seat, black, mounted.
    • Torsion bar assembly, specify original style or competition, mounted, no rod ends.
    • Tunnel close off panel, specify original ’78,’79 or current ISR legal.
    • Original RXL aluminum square bumper.
    • Most RXL components are painted black as original
    • Price: $8,000.00 USD.
  • A ROLLING CHASSIS DOES NOT INCLUDE:
    • Engine of your choice
    • Clutches
    • Pipes
    • Suspension, track or drive axle shaft with drive wheels.
    • Gas tank and mounts.
    • Decals and hood paint.
    • Skis and carbides.
    • Front shocks and springs.
    • Jackshaft, bearings and chaincase.
    • Rod ends for front suspension and steering. [ See below for list]
    • Ski spindles.
    • Tachometer and temperature gauge mounts.
    • Throttle block and cable.
    • Brake system.
    • Coolant reservoir.
    • Coolant hoses.

    Above components are of your choice and may be added as desired.

    All orders are taken on a first come first served basis, it’s the only fair way. Thanks.

  • ROD ENDS & BEARINGS REQUIRED FOR AN RXL
    • 1/2 x ½ Male RH NF Wahl # 03-372 2 required
    • 7/16x7/16 Male RH NF Wahl # 03-368 4 required
    • 7/16x7/16 Male LH NF Wahl # 03-370 4 required
    • 3/8x3/8 Male RH NF Wahl # 03-356 3 required
    • 3/8x3/8 Male LH NF Wahl # 03-358 2 required
    • 3/8x3/8 Female RH NF Wahl # 03-384 3 required
    • 3/8x3/8 Male RH NF with stud Wahl # 03-360 2 required
    • Spherical bearing for bottom of steering post 7/8” ID, Wahl # 05-820 1 required
    • Spherical bearing for jackshaft, 1” ID, Wahl # 05-819 1 required
    • Flangette mount plates for mounting spherical bearing, Wahl # 05-826 2 required

ATTENTION – now available - reproduction 1981 SKI DOO Sno Pro ‘birdcage’ frames built to original specifications. Also available are trailing arms, coolant reservoirs, and repro aluminum ski spindles. Call for more info.

Contact me for details. I can provide a complete turn key sled or anything in between. All prices are subject to change without notice. Please be advised that these reproduction and salvaged items are not show quality. They are as the factory would have produced them in 1978, for a racing sled!!! If you require show quality, you will have to make arrangements with me to achieve that status.
Thank you, Dale.